TruBalánce™ — Halt Washer Movement, End the Shimmy, Protect Your Floors
Free US Shipping
Almost out of stock
Secure Your Washer and End the Spin Cycle Noise for Good
If your washing machine "marches" across the floor with each spin, the solution isn’t another flat rubber pad — it’s height. TruBalánce™ pads feature a twist-up threaded post (adjustable from 8 to 11 cm) and a dual rubber grip that locks onto tile, vinyl, or hardwood surfaces. Level your washer in under a minute. The walking stops. The shaking ends. Your downstairs neighbor stops leaving notes.
If Your Washer Sounds Like a Jet Taking Off, Your Floors Are Suffering
Most "anti-vibration" pads are simple thin rubber discs. They flatten out after a few weeks, can’t level uneven floors, and allow your washer to inch closer to the door with every load. Using towels under corners slips away. Built-in machine feet only adjust about a centimeter. Meanwhile, your tile cracks, your hardwood gets scratched, and the spin cycle wakes the baby.
➤ Stop the washer from wandering before the next load: The black rubber base grips tile, vinyl, hardwood, and laminate floors tightly. The top rim secures the appliance foot. Even a heavy front-loader won’t budge on full spin.
➤ Twist to level on any surface — adjustable from 8 to 11 cm: The threaded post manually adjusts a full 3 cm. No tools, shims, or rolled cardboard needed under corners.
➤ Designed for real laundry-room conditions: Molded PP/PVC construction resists detergent splashes, hose drips, and steam. Unlike cheap pads, it won’t rust, swell, or break down.
Made to Handle the Wet, Soapy, Hot-and-Cold Chaos of a Laundry Room
Laundry rooms are tough environments. Hose leaks cause puddles. Hot water releases steam under your machine. Detergent spills, lint, and occasional overflows soak the floor beneath the drum. Rubber pads distort. Foam pads go gummy. Cheap plastic feet crack.
TruBalánce™ pads are crafted from solid PP/PVC with a sealed rubber base grip. They handle standing water without rusting, warping, or losing traction. Install once and forget they exist for years — even if your hose ever leaks between uses.
Why Apartment Renters Refuse to Run a Load Without Them
Thin walls, tiled bathrooms, neighbors downstairs — apartment laundry is unforgiving. Renters who switched to TruBalánce™ pads share the same story: they ran a full spin cycle expecting chaos, but found the machine exactly where they left it. No banging. No creeping. No notes from below.
"Skeptical at first because they look cheap. Put them under my LG front-loader on tile and the machine hasn’t moved a millimeter in three months. The walking stopped, noise halved, and my downstairs neighbor stopped messaging. Wish I’d bought these the day I moved in." — Maya R.
Enjoy a Quiet, Rock-Solid Laundry Room You Forget About
✓ Reduce spin-cycle thuds and vibrations: Dual rubber surfaces soak up the shaking before it travels to floors and walls.
✓ Extend your appliance’s lifespan: A level, locked washer works less hard. Bearings, suspension, and hoses last longer without mid-spin lurching.
✓ Ideal for more than washers: Same pads stabilize fridges, freezers, dryers, and even sofa legs that slide on hardwood. One set handles multiple tasks.
From a Walking Washer to Solid as a Rock in Three Turns
Step 1: Tilt the machine back, place a pad under each foot, then set the washer down onto the rubber tops.
Step 2: Hand-turn each pad’s threaded post up or down until the machine sits perfectly level (between 8 and 11 cm).
Step 3: Run a full spin cycle. The rubber grips lock tight under load — no movement, no noise.

| TruBalánce™ Appliance Pads | Flat Rubber Pads | Built-In Machine Feet Only |
|---|---|---|
| Twist-adjustable 8–11 cm for leveling any floor | ❌ | ❌ |
| Dual rubber grip — locks at top and bottom | ❌ | ❌ |
| Sealed PP/PVC body — doesn’t rust, warp, or break down | ❌ | ❌ |
Specs for the Engineer in You
- Set: 4 pads (one per appliance foot)
- Diameter: 6.8 cm / 2.67 in
- Height range: 8 cm – 11 cm / 3.15 in – 4.33 in (twist to adjust)
- Material: PP/PVC body with rubber top rim and non-slip rubber base
- Compatibility: Front-loaders, top-loaders, dryers, fridges, freezers, sofas
Your Questions Answered Before You Buy
Will these fit my specific washing machine?
The 6.8 cm rubber top rim fits standard feet found on most front- and top-loading washers — including LG, Samsung, Whirlpool, GE, Bosch, and many European stackable models. The pad simply sits beneath your existing feet, with no screws or attachments needed.
Can they support a heavy front-loader?
Absolutely. The threaded post is made of solid molded PP/PVC, not hollow plastic. A standard 4-pad set comfortably supports a typical 70–90 kg / 150–200 lb washer, and the rubber base grips tighter under weight — never loosening.
How does the height adjustment operate?
Simply twist the top section by hand. Internal threading raises or lowers the post between 8 cm and 11 cm. No tools required, no parts to lose. It compensates for uneven tile, warped vinyl, and aged wood floors that built-in feet can’t fix.
Are they safe in a damp laundry setting?
Yes. The PP/PVC body repels moisture and the rubber base is sealed tight, so detergent splashes, hose leaks, and standing water won’t cause rust, swelling, or weaken the grip.
Can I move or take them with me later?
Anytime you want. They’re never glued, screwed, or drilled in place. Just tip the machine back, slide the pads out, and use them on your next appliance — or pack them up when you move.
Stable for Years or Your Money Back
Install TruBalánce™ pads, run a full spin cycle, and notice the difference. If the walking doesn’t stop, the shaking doesn’t lessen, or the washer doesn’t sit solidly on your floor — just return them for a full refund. No restocking fees, no questions asked.
Pruvello Guarantees:



