StormGuard™ — Brush On an Invisible Waterproof Seal That Won't Peel or Crack
StormGuard™ — Brush On an Invisible Waterproof Seal That Won't Peel or Crack
High Quality
Free US Shipping
Hassle Free Returns
Almost out of stock
Patch the Leak Once and Stop Watching the Stain Come Back
You dried the wall, sealed the spot, and felt good about it—until the damp patch crept back the next time it rained. StormGuard™ is a silicone-based, brush-on waterproof agent that soaks into cracks and dries into a clear, flexible film that moves with the surface instead of peeling off it. Goes on with the included brush in one thick coat. No tearing apart half the bathroom, no calling a guy.
Stop Sealing a Leak That Just Comes Back in a Week
Most spray sealants look fine the day you apply them—then leave thin spots around edges and corners and start peeling once the surface gets wet and moves. Rigid caulk cracks the first cold snap. StormGuard™ goes on the opposite way: a thick, continuous brush coat that grips into the crack and stays flexible, so the water that used to sneak in stays locked out.
➤ Goes On Thick in One Brush Coat—No Thin Aerosol Spots: Brushing it on lays down a full, even film right into the crack, not a light mist that misses the corners. You cover the whole problem area the first time instead of spraying coat after coat and still finding a gap.
➤ Flexes With the Surface So It Won't Crack or Peel: The cured film stays rubbery, so it bends as wood swells, tile shifts, and frames expand in the heat. That's the part cheap caulk and peel-off coatings get wrong—and the reason yours kept coming back.
➤ Dries Clear and Invisible on Wood, Metal, Tile and Stone: No white smear across your grout or window frame. StormGuard™ disappears as it cures, sealing the leak without leaving a patch you have to look at every day.
A Flexible Film That Bends Instead of Breaking
You brush StormGuard™ straight onto the crack and it self-levels into a smooth, continuous layer—touch dry in about 30 minutes, fully sealed within 24 hours. Because it cures into one unbroken rubbery sheet rather than a stiff crust, there's no hairline gap for water to find later.
That's the difference from the stuff that "looked great on day two and peeled on day three." Stiff coatings snap the moment the surface moves; thin sprays miss the edges. StormGuard™ stays bonded and stays flexible through summer heat and winter freeze, so the spot you sealed stays sealed.
Why Homeowners Who'd Given Up on Sealants Keep StormGuard™ Under the Sink
Plenty of people land here after a roof spray, a tube of caulk, and a damp wall that never stayed dry. They brush StormGuard™ on a bathroom window or a leaky pipe joint, wait a day, and the drip is gone for good.
"I'd already burned money on spray-on stuff that peeled right off the window frame. Brushed this on in one coat, let it sit overnight, and we've had two heavy storms since with not a drop inside. It's the first one that actually stayed put." — Maria T.
Fix It Yourself and Stop Worrying Every Time It Rains
✓ Keep Water Where It Belongs: Seal the crack once and stop the slow drip that warps trim, stains walls, and feeds mold in the corner. The leak stays outside; your room stays dry.
✓ Handle It in an Afternoon, No Pro Needed: Grab the included brush, coat the spot, and you're done. No special skills, no quote from a contractor, no waiting a week for an appointment.
✓ Trust the Repair Through Every Season: A flexible, invisible seal that holds through heat, rain, and freeze means you stop checking that spot after every storm.
How StormGuard™ Seals the Leak in 3 Steps
Step 1: Find the leak and wipe the area clean and dry. StormGuard™ bonds to wood, metal, tile, stone, and masonry—so the same jar handles the window, the pipe joint, and the basement corner.
Step 2: Brush a thick, even coat over the crack with the included brush, and smooth the edges with the spreader. It self-levels into a clear film—touch dry in about 30 minutes, fully sealed in 24 hours.
Step 3: Let it cure and forget about it. The flexible film flexes with the surface and stays invisible—no cracks, no peeling, no stain creeping back next season.
| What Actually Keeps the Leak Out | StormGuard™ | Others |
|---|---|---|
| Full, Continuous Coat | ✅ Thick brush coat fills the crack with no thin spots | ❌ Aerosol mist misses edges and corners |
| Stays Flexible, Won't Peel | ✅ Rubbery film bends with the surface | ❌ Cracks or peels once the surface moves |
| Invisible Finish | ✅ Dries clear on tile, wood, metal, stone | ❌ Leaves a visible patch or white smear |
For Those Who Demand Every Detail
- Formula: Silicone-based waterproof agent that dries into a clear, flexible film
- Surfaces: Bonds to wood, metal, tile, stone, masonry, and brick—inside or out
- Drying Time: Touch dry in about 30 minutes; fully sealed within 24 hours
- What's Included: Jar of StormGuard™ agent plus a brush and spreader—everything you need to apply it
Got Questions? Your StormGuard™ Answers Await
Will StormGuard™ work on my surface?
Yes—it bonds to wood, metal, tile, stone, masonry, and brick. Wipe the area clean and dry first so the film grips into the crack instead of sitting on top of grime.
How long until it's actually sealed?
Touch dry in about 30 minutes, fully cured and sealed within 24 hours. Give it that full day before you run water over it.
Will it peel or crack like the spray I tried before?
That's the whole point of the brush-on film—it cures flexible and stays bonded as the surface moves and gets wet, instead of going stiff and lifting at the edges.
Do I need any tools?
No—the brush and spreader are in the box. Brush on a thick coat, smooth the edges, done. No special skills required.
Where can I use it around the house?
Bathroom windows, pipe joints under the sink, shower grout, roof flashing, basement corners—anywhere water sneaks in. Works indoors and out.
Seal It Once—We'll Back It If It Doesn't Hold
Brush StormGuard™ over the crack, let it cure, and stop dreading the next storm. Its silicone-based film dries clear, flexes with the surface, and bonds to wood, metal, tile, and stone—so the leak that kept coming back finally stays gone. If you brush it on as directed and it doesn't seal your spot, tell us and we'll make it right. Fix the leak yourself this weekend and get your dry, quiet room back.
Pruvello Guarantees:
